充电系统用电缆EV-S90S90PU

1、根据需要电缆接头的型号规格选购合适的接头材料，如今电缆接头材料质量也是参差不齐，但是为了确保电缆接头质量，建议不要贪图便宜，*好选择质量信得过的电缆接头厂家的材料。

Choose the appropriate joint material 1, according to the specifications required cable joint, cable joint material quality is uneven, but in order to ensure the quality of cable joints, that do not covet cheap, cable connector manufacturers choose the best quality trustworthy materials.

2、电缆接头时*好不要选择雨天，因为电缆进水会严重影响电缆的使用寿命，严重的甚至会出现短路事故。

2, when the cable connector is best not to choose a rainy day, because the cable water will seriously affect the service life of the cable, serious and even a short circuit accident.

3、制作电缆防水接头前一定要仔细阅读厂家的产品说明书，这一点对于10kV及以上电缆，尤为重要，做之前把所有的工序都想好再做。线缆315网www.xianlan315.com

3, the production of cable waterproof joints must be carefully read the manufacturer's product specification, which is more important for 10kV and above the cable, before doing all the processes are good to do. Cable 315 nets www.xianlan315.comEV-S90S90PU充电系统用电缆

4、10kV以上单芯铠装电缆的终端接头，切记只能一端钢带接地。

4, 10kV single core armored cable terminal connector, remember that only one end of the steel strip grounding.

5、铜管压制时不能太用力，只要压接到位即可，压接后的铜端面势必会有很多凸起点，这个一定要用锉刀挫平，不能留有任何毛刺。EV-S90S90PU充电系统用电缆

5, copper pressing is not too hard, as long as the crimping place can be pressed after the end, copper is bound to be a lot of convex starting point, this must use file contusion flat can not have any burrs.

6、热缩电缆接头在使用喷灯时，要注意喷灯来回移动，不能只对着一个方向不断地喷灯。

6, heat shrinkable cable joint in using a blowtorch blowtorch, attention should be paid to move back and forth, not only on a direction constantly blowtorch.EV-S90S90PU充电系统用电缆

7、冷缩电缆接头的尺寸必须严格按照图纸说明来做，尤其是抽出预留管中的支撑物时，更要小心才是。

7, shrink the size of the cable connector must be strictly in accordance with the drawings to do, especially in the withdrawal of the tube in the support, but also to be careful is.